Maybe we could call it RC? Or by it’s full legal name The Mostly Harmless Brewing Co.’s Ryesponsibale Collaboration Session IPA, Esq. We’re gonna need a bigger label.
We dropped some dry hop action into this one earlier this week (1 oz Crystal / .5 oz Centennial / .5 oz Ahtanum) and it’s cold crashing right now. It’s got an amazing hop aroma and a pronounced, but smooth, bitterness. We finished up at 1.010 which landed us at 4.8% ABV, a bit higher than our target of 4.2% but we used our grain mill for the first time and pulled a bit more efficiency than we estimated. Oh well, 4.8% is still pretty sessionable IMO.
If you missed the back story on this beer check it out here. In short, we collaborated with some friends around the country and we’re each brewing the same recipe and then we’ll share the beers we brewed to compare them. Should be a fun experiment. OK, I guess that pretty much is the back story, no need to click that link now.
Our Centennial hop farming is coming along nicely as well despite brew dog Boo’s efforts to dig up the hop bed. We’ve discussed that this is unacceptable and I’m sure she’ll behave now. I can’t wait til these get long enough to start climbing and producing cones.
Centennial hops start to shoot up!
Since Saturday was National Homebrew Day / Big Brew Day we pretty much had to brew some beer. Mother Nature looked upon us most favorably and the weather was absolutely perfect for hanging outside and brewing. A few friends joined us and enjoyed a day of brewing, drinking, eating and smoking cigars – not a bad way to spend a Saturday.
For this brew we collaborated with several friends on the brew. We’re all going to brew the beer then send a couple bottles to each other to see the differences we each get. We’re pretty widely distributed (GA, OH, FL, TX and MO) so it will be interesting to see the differences we get from this recipe. We’ve wanted to do a session beer for a while and this was a good chance to make it a bit more fun. The recipe is based off of Denny Conn’s Wry Smile IPA tweaked to a target of 4.2% ABV and 61 IBU. This was our first brew milling our own grains and we got a bit more gravity than expected. We hit 1.047 with a target of 1.042, looks like our actual ABV on this one will land around 4.8%, still sessionable IMO.
We’ll check the gravity this weekend and see how it’s coming along. This one will probably have to stay in the fermenter for a few weeks as I have to go out of town the weekend of the 17th, hopefully we’ll get it kegged up on the 24th.
Not a long video, but here’s a little Instagram snippet from the brewday.
Our hops are coming in nicely. It took them a while to break the surface but they’re growing an inch or so each day now. We’ve got 6 shoots that I can find with a couple of them much more aggressive than the others. I wish they’d hurry the heck up.
Hop Sprout – 05/02/14
Hop Sprout – 05/06/14
National Homebrew Day Big Brew – May 3, 2014
Some info on National Homebrew Day from the AHA website:
In 1988, May 7 was announced before Congress as National Homebrew Day. The American Homebrewers Association (AHA) created AHA Big Brew as an annual event to celebrate National Homebrew Day around the world. AHA Big Brew is held each year on the first Saturday in May.
Anyone, even homebrew shops, can host and register a Big Brew event, so invite your friends and family, gather around the brew kettle and join in the global celebration of the greatest hobby there is—homebrewing!
There are a lot of events planned around the country to introduce people to homebrewing. If you’d like to see what this hobby is all about check here to see what events are in your area. We’ll be celebrating here at MHB by brewing up a session rye IPA. The recipe for this is a collaboration with several of our friends and we are all going to brew it then share the beer with each other to see the differences. We’re located in GA, OH, FL and TX so it will be interesting to see the differences we get from our different equipment, processes and water profiles.
Stay tuned and we’ll post a recap of brew day with some more info on the beer.
This weekend we bottled up our Rainy Day IPA. It’s a very sessionable at 4.0% ABV and not too hard on the palate at 42 IBU. This is Brian’s recipe and was based on a few clone recipes of Founder’s All Day IPA. The recipe included Maris Otter, Caramel and Rye malt along with Simcoe, Amarillo and Centennial hops. Based on the samples we tried at bottling this should be a great beer.
Rainy Day IPA
We brewed this one on 12/28/13, our last beer of 2013. The weather didn’t want to cooperate with us and it was cold and rainy and windy, all around crappy. We had to set up a tent/awning to keep the rain out of our boil kettle and heaters cranking to keep us from freezing to death, OK… maybe 40°F wouldn’t freeze us to death but we live in the South so anything below 50° is freezing as far as we’re concerned. Considering how nature was being such a mother the brew day went pretty well overall.
We also got to try out some new gear for this brew day. We replaced the braided hose in our MLT with a bazooka screen and we got a pH meter that we used for the first time. I won’t go into a bunch about pH meters as there’s plenty of reading out there if you choose, but we purchased the Oakton Eco Testr pH 2 and we have been happy with it so far. It has an overall 4 star review and the price was $47.43 when we ordered it. After we use it a bit more I’ll probably do a more detailed ‘review’ of it.
Capped and Cased
There are pros and cons to adding new gear to your brewhouse. Improvements are always nice but anything you add to the equipment will change the results of your brew, hopefully for the better, but you still have to adjust for the changes made. As an example, the bazooka screen flowed much quicker when we were lautering and sparging, we had to keep an eye on the flow and adjust so we didn’t move too quickly, I think this may have cost us a couple points of gravity but we know now for next time. Using the pH meter I found the pH of our water out of the tap is 8.8, normal range is 7.0 – 8.5 so it’s a bit on the hard side. I haven’t looked yet to see if I need to make any tweaks there however the mash pH was 5.4 so we fell within the acceptable range.
Everything else went smoothly. We kept this in primary at 62°F for 2 weeks the dry-hopped for a week, cold-crashing it the last couple days before bottling. I’m really stoked to try this one and with the lower ABV it should be ready fairly quickly. Maybe I’ll get lucky and it will rain here in a couple weeks so I can try it out in its intended environment.
Here’s a little data porn for those that like this stuff. I chart out the fermentation temps and then mark the low and high points during primary fermentation and any anomalies. We use an STC-1000 temp controller on our fermentation chamber and, as you can see on the chart, it kept us within +/- 0.52°F for the whole two week fermentation. That’s pretty solid control.
Click the chart to view that sucker full size.
Rainy Day IPA – Fermentation Chart
A couple weeks ago we brewed a pseudo-clone of Founder’s All Day IPA. You know how movies that are total bullshit will say something like, “inspired by actual events.”? Well that’s what this beer is, except for the bullshit part… we hope. We still need to dry hop it but I took gravity today and we’re done fermenting and we nailed a very sessionable 4.0% ABV with this one. It smells great and it tastes awesome, I can’t wait to try it after dry hopping, carbing, etc. This was Brian’s recipe, and since his last creation ended up being a soy sauce IPA I’m pretty glad to see this one seems to be coming along nicely.
But this post isn’t about the beer, it’s about the label. Which is awesome. Brian and collaborate on the labels and both of us throw in ideas and I usually do the photoshopping. Sometimes we have similar ideas, and sometimes we don’t. This time we were 180° apart. I was thinking of a simple shot of an IPA glass on a table with the view looking out through a rainy window pane… because something like that is in line with my Photoshop abilities. But no, not Brian, he’s all like, “I think we (he meant me) need to do something like this (insert Singin’ In The Rain movie poster) for our label. Maybe replace the heads with hop cones?” OK, Brian… fine…. I’ll give it a shot. I thought I was going to get off easy with a stupid beer in a window, pfft.
But I have to say, I like the results. That was a pretty good idea he had there – and it helped me to continue to develop my Photoshop skillz. It’s not perfect, but it is pretty sweet. We’ll post more info on Rainy Day IPA when it’s done, I may have to wait for a rainy day to try one.
Singin’ in the Rainy Day IPA
And for comparison, the original movie poster…
Singin’ in the Rain